Best for quilt and patchwork piecing with 1/4" or 1/8" seam allowance. Its back and small needle opening are designed to give the right pressure to fabrics.

Link to video

Model number: F001N

Designed to create a flat narrow hem on lightweight fabrics.

Link to video

Model number: F003N

Allows you to install concealed zippers easily.

Model number: F004N

For Darning, quilting or free motion. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created.

Model number: F005N

Link to video
 

Designed for consistent feeding with fabrics such as leather, vinyl and other novelty fabrics.
 

Link to video
 

Model number: F007N

To gather one or two layers of lightweight fabric.
*The low shank adapter is required for Super Ace + e and Super Galaxie series.

Link to video
 

Model number:F012N

With a tape guide, this makes attractive binding similar to pre-folded or unfolded bias tape.

Compatible with all our home-use sewing machines.

Model number: F014N

Attaches to walking foot, acts as guide to set precise distances from one point to another.
Use it to sew parallel rows at preset even intervals.
This quilting guide may also be inserted in the hole on the back of the snap-on presser foot ankle.

Compatible with all our home-use sewing machines

Model number: F016N

Adjustable for creating blind hems on a variety of fabrics. This foot is also handy for sewing fabric edges with a fixed seam allowance.(Snap-on foot)

Compatible with Star 10-40e, PE-300S/PE-400D BS, LS, PS, VX, XL, XR series

Model number:F018N

This foot guides braiding for embellishment. It is used with a braid up to 5 mm in width and attached it to the fabric as it sews.

Compatible with all our home-use sewing machines

Model number: F021N

The foot works perfectly for attaching three cords or threads through grooves on clothing, household linens, etc.

Compatible with Prestuge series, BS, LS, PS, PX, VX, XL, XR series PE-300S and PE-400D, Star 10 to 40E (5mm vertical and horizontal bobbins sewing machines)

Model number: F024N

The foot creates dimensional threads loops on the top surface of the fabric. The loops can be also fringe by sewing with straight stitch along the root of loop and cutting bobbin thread.

Compatible with all our home-use sewing machines

Model number: F025N

Handy for use when sewing special fabric edges like frills. For shell effect when hemming in zigzag stitch.

Compatible with Prestige series, BS, LS, PS, PX, VX, XL, XR series, PE300S/ PE400D, Star 10 to 40E (5mm vertical and horizontal bobbin sewing machines)

Link to video

Model number: F029N

For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics.

Compatible with Star 10 to 40E, XL6000 series (5mm horizontal bobbin sewing machine)

Model number: F034N

Link to video
 

The scale on the presser foot can be used for perfect topstitching on both staight and curved lines. 

Model number: F035N

Adjustable for positioning the presser foot on either the left or right side of the needle. This foot makes it easy to attach zippers or piping.

*The low shank adapter is required for Super Ace + e, Super Galaxie 2000, 2100, 3000 and 3100.

Compatible with all home sewing machines

Model number: F036N

Link to video
 

This zigzag foot is equipped with a featuture that keeps the foot level when sewing thick seems.

Model number: F053N

Perfect for precise and esy joining of fabrics, even sheer and difficult fabrics. It can also be used to line up and sew lace to the edge of another fabric.

Model number: F056

Creates perfect quilt and patchwork piecing with 1/4 inch seam allowance.
Ideal for long strip piecing.

Model number: F057

Link to video
 

Provides better visibility in the needle area. Ideal for securing edges of applique, Sewing curves, topstitching etc.

Model number: F060

The large opening on the front of the foot gives you wide visibility in the needle area. Use for free-motion, outline quilting etc.

Model number: F061

Link to video
 

This specially marked "V" foot is included with the Innov-is I(e) and is also available for other selected models. The side extention ruler on this foot lets you measure the distance from the needle to the edge of your fabric.

The Roller Foot is designed to feed slippery fabrics such as silk, leather and velvet. The textured rollers on the foot provide pressure for fabrics between foot and feed dogs so that users can sew various slippery fabrics easily and smoothly.
The Roller Foot is commonly used with a straight stitch or zig zag stitch. It can also be used with other utility and decorative stitches.

Model number: F066.

Wide Table for LX series

Model number: WT9

Pack of 10 11.5 mm bobbins for use with all Innov-is models, ES series, BC series, MS, LX series, LS series, X5, JS23, BS series, XR Series, AE series

Model number: SFB

For best results use only original Brother Bobbins in your machine.  These are supplied in original Brother packaging.

Using the wrong bobbin type or non Brother  bobbins may result in poor performance or cause damage to your machine. 

If in doubt please check your manual or contact your dealer.