Quilting feet

Here you will find a large number of quilting feet for our latest machines.

1/4" Piecing foot

Art. No. XC1944052

Best for quilt and patchwork piecing with 1/4" or 1/8" seam allowance. Its back and small needle opening are designed to give the right pressure to fabrics.

Link to video

Model number: F001N

Quilting Foot – plastic

Art. No. XC1948052

For Darning, quilting or free motion. The foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created.

Model number: F005N

Link to video
 

Quilting guide

Art. No. XC2215052

Attaches to walking foot, acts as guide to set precise distances from one point to another.
Use it to sew parallel rows at preset even intervals.
This quilting guide may also be inserted in the hole on the back of the snap-on presser foot ankle.

Compatible with all our home-use sewing machines

Model number: F016N

Clear View Foot (Vertical)

Art. No. XC1959002

For optimum visiblity while sewing. It is ideal for topstitching, decorative stitches, patchwork piecing, etc.

Compatible with Prestige series BS, LS, PS, PX, VX, XL except 6000 series, XR series (5mm stitch width, vertical bobbin sewing machines)

Model number F022N

Clear-view Foot (Horizontal)

Art. No. XC1958052

For optimum visiblity while sewing. It is ideal for topstitching, decorative stitches, patchwork piecing, etc. (Snap-on foot)

Compatible with Star series, Super Ace I to III and +e, PE-300S/PE-400D, Super Galaxie series (Horizontal bobbin sewing machines)

Model number: F023N

Walking Foot 7mm (Horizontal)

Art. No. XC2214052

The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machines's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric. The walking foot is great for quilting, sewing when matching prints or plaids or fabric drift is an issue.
Brother offers several Walking feet which differ in the size of the feed dog, shank height etc. Please check your manual or the machine listings on this web site to find the correct walking foot to fit your machine.

Walking Feet are not for use in reverse or side to side sewing as well as some built in stitches that include other than forward movement of the feed dogs.

Model number: F033N

Link to video
 

Walking Foot 5mm (Horizontal)

Art. No. XC2165002

For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics.

Compatible with Star 10 to 40E, XL6000 series (5mm horizontal bobbin sewing machine)

Model number: F034N

Link to video
 

 

Stitch Guide Foot

Art. No. XC1969002

The scale on the presser foot can be used for perfect topstitching on both staight and curved lines. 

Model number: F035N

Walking Foot

Art. No. XC2213052

For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics.

Compatible with PE-300S/ PE-400D

Model number: F041N

Link to video
 

 

Straight Stitch Foot (7mm)

Art. No. XC1973052

This is used for consistent straight stitching on lightweight or sheer fabrics.

Compatible with Star 110 to 140E, Super Ace and Super Galaxie series (7mm horizontal bobbin sewing machine)

Model Number: F042N

Vertical Walking Foot 5mm

Art. No. XC2169002

For improved results when sewing or quilting on fabrics which tend to stick to the bottom of a presser foot or sheer fabrics that are difficult to control. A walking foot assists in keeping the lines matched on multiple layers of plaid fabrics. 

Compatible with Prestige series BS, LS, PS, PX, VX, XL3000 and 5000 series, XR series

 

Link to video
 

 

Edge joining foot

Art. No. XC6441252

Perfect for precise and esy joining of fabrics, even sheer and difficult fabrics. It can also be used to line up and sew lace to the edge of another fabric.

Model number: F056

1/4" Piecing foot with guide

Art. No. XC7416252

Creates perfect quilt and patchwork piecing with 1/4 inch seam allowance.
Ideal for long strip piecing.

Model number: F057

Link to video
 

Open Toe Quilting foot

Art. No. XE1097001

The large opening on the front of the foot gives you wide visibility in the needle area. Use for free-motion, outline quilting etc.

Model number: F061

Link to video
 

Open toe walking foot

Art. No. XF1434001

The feed dogs on the walking foot move at the same pace as the machines lower feed dogs to feed the fabric consistantly. Fabrics that can be difficult to sew such as vinyl, leather, quilting layers and velvet can easiliy be sewn. The open toe allows for greater visibility.

Model number: F062

Link to video
 

 

Vertical stitching alignment foot

Art. No. XE5224001

This specially marked "V" foot is included with the Innov-is I(e) and is also available for other selected models. The side extention ruler on this foot lets you measure the distance from the needle to the edge of your fabric.

Roller foot

Art. No. XF1723001

The Roller Foot is designed to feed slippery fabrics such as silk, leather and velvet. The textured rollers on the foot provide pressure for fabrics between foot and feed dogs so that users can sew various slippery fabrics easily and smoothly.
The Roller Foot is commonly used with a straight stitch or zig zag stitch. It can also be used with other utility and decorative stitches.

Model number: F066.

Circular attachment

Art. No. CIRC1

Circular attachment for sewing in a circle
Optional accessory to sew in a circle, with utility and decorative stitches, without side feeding.

Compatible with Innov-is I/Ie, Innov-is 4000/ 5000/ 1500/ 2200 series, QC-1000, NX-2000, Innov-is 1200, Innov-is 900/ 950, Innov-is 200/ 350/ 400/ 550/ 600 series and Innov-is 10/ 20/ 30/ 50 series

Includes:
• Circular attachment
• 1 screw for set-up (plus 1 spare)
• Braiding foot
• Cording foot (3 cords)
• Quarter Circular Template
• User manual

Specification:
• Circular size is 30mm to 130mm
• Scale displayed on every 5mm
• Template is used for matching the first stitch to the last
• Can be used with optional presser feet

Model Number: CIRC1

Straight Stitch foot and staight stitch needle plate

Art. No. XD0606252

Straight stitch foot and needle plate for perfect straight stitching.

Model number: SNP01

Couching Foot & Guide for Dual Feed DF1

Art. No. XG3129001

Enjoy creating fabric surface embellishment with yarn while using the DF1 Dual Feed attachment. Order Code: XG3129001

Direct dual feed attachment (DF1) required