PR series embroidery project movie

 

Upper threading

; ;
 

Upper threading

Procedure

  1. Pass thread through 3 thread guide holes
  2. Pass thread under upper thread guide
  3. Pass thread clockwise around thread tension disc
  4. Pass thread under upper thread guide
  5. Pass thread through thread take up lever and down through thread guide hole
  6. Pass thread on needle bar thread guide with needle threader tool

Accessory

  • Upper thread
  • Needle threader tool

Needle threading

; ;
 

Needle threading

Procedure

  1. Select needle number
  2. Push needle threader button, needle threader comes down
  3. Pass thread right to left under needle threader hook
  4. Pass thread under guide on presser foot
  5. Cut thread with thread cutter
  6. Push needle threader button, then machine automatically passes thread

Accessory

  • Upper thread

Set up cap frame driver

; ;
 

Set up cap frame driver

Procedure

  1. Take out standard arm
  2. Set up cap frame driver
  3. Tighten 2 upper screws
  4. Tighten 2 lower screw

Accessory

  • Cap frame set

Set up cap frame

; ;
 

Set up cap frame

Procedure

  1. Set stabilizer on cap frame
  2. Align cap center with cap frame center
  3. Secure with clips

Accessory

  • Cap frame set
  • Stabilizer

Sports jacket (on chest)

; ;
 

Sports jacket (on chest)

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (medium) 100mm x 100mm (4 x 4 inches)
  • Stabilizer

Sports jacket (on sleeve)

; ;
 

Sports jacket (on sleeve)

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Stabilizer

Sports pants

; ;
 

Sports pants

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Stabilizer

Polo shirt (on chest)

; ;
 

Polo shirt (on chest)

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (medium) 100mm x 100mm (4 x 4 inches)
  • Stabilizer

Polo shirt (on sleeve)

; ;
 

Polo shirt (on sleeve)

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Stabilize

Stretch undershirt (on stretch fabric)

; ;
 

Stretch undershirt (on stretch fabric)

Procedure

  1. Frame your fabric without any shrinkage
  2. Set frame on machine
  3. Setting plastic and stabilizer
    Put plastic under fabric and plastic on fabric
  4. Unlock and start embroidery

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Plastic
  • Stabilizer

Business shirt (on sleeve)

; ;
 

Business shirt (on sleeve)

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Stabilizer

Business shirt (on cuffs)

; ;
 

Business shirt (on cuffs)

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Stabilizer

Glove belt (floating embroidery)

; ;
 

Glove belt (floating embroidery)

Procedure

  1. Set stabilizer on frame
  2. Put glove on stabilizer and tape it to secure
  3. Set frame on machine
  4. Unlock and start embroidery

Accessory

  • Embroidery frame (large) 130mm x 180mm (5-1/8 x 7-1/8 inches)
  • Stabilizer
  • Tape

Towel

; ;
 

Towel

Procedure

  1. Frame your fabric with water soluble stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (medium) 100mm x 100mm (4 x 4 inches)
  • Water soluble stabilizer

Cap

; ;
 

Cap

Procedure

  1. Set stabilizer on frame
  2. Put glove on stabilizer and tape it to secure
  3. Set frame on machine
  4. Unlock and start embroidery

Accessory

  • Embroidery frame (large) 130mm x 180mm (5-1/8 x 7-1/8 inches)
  • Stabilizer
  • Tape

3D Cap embroidery

; ;
 

3D Cap embroidery

Procedure

  1. Set cap frame driver on machine
  2. Set cap frame jig on table and frame cap on cap frame with stabilizer
  3. Set cap frame on machine
  4. Set foam sheet on embroidery area
  5. Unlock and start embroidery, take your hand off from foam sheet after 40 to 50 stitches

Accessory

  • Cap frame set
  • Stabilizer
  • Foam sheet

Cap (on side)

; ;
 

Cap (on side)

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Stabilizer

Judo/Karate belt

; ;
 

Judo/Karate belt

Procedure

  1. Setting stabilizer on frame
    Cut out embroidery area from stabilizer, and frame it.
    Set double-sided tape to secure belt.
  2. Put belt on stabilizer and tape it to secure
  3. Set frame on machine
  4. Unlock and start embroidery

Accessory

  • Embroidery frame (large) 130mm x 180mm (5-1/8 x 7-1/8 inches)
  • Stabilizer (or sheet for floating embroidery)
  • Double-sided tape
  • Tape

Wristband/Socks

; ;
 

Wristband/Socks

Procedure

  1. Frame your fabric with water soluble stabilizer attached to prevent any shrinkage
    Pull wristband bottom side forward to prevent embroidering both side.
  2. Set frame on machine
  3. Unlock and start embroidery
You can embroidery on withwith this way.

Accessory

  • Embroidery frame (small) 40mm x 60mm (1-1/2 x 2-3/8 inches)
  • Water soluble stabilizer

Enamel sports bag (applique)

; ;
 

Enamel sports bag (applique)

Procedure

  1. Take out pocket from sports bag
  2. Setting stabilizer on frame
    Set stabilizer on frame, and set double-sided tape to secure sports bag
  3. Set sports bag on stabilizer
  4. Set frame on machine
  5. Embroider applique outline running stitch
  6. Set applique inside running stitch (secure with spray adhesive)
  7. Put plastic on it, unlock and start embroidery

Accessory

  • Embroidery frame (extra large) 200mm x 300mm (7-7/8 x 11-3/4 inches)
  • Stabilizer (or sheet for floating embroidery)

Shoe bag

; ;
 

Shoe bag

Procedure

  1. Frame your fabric with stabilizer attached to prevent any shrinkage
  2. Set frame on machine
  3. Unlock and start embroidery

Accessory

  • Embroidery frame (medium) 100mm x 100mm (4 x 4 inches)
  • Stabilizer

Emblem

; ;
 

Emblem

Procedure

  1. Frame applique material with stabilizer
  2. Set frame on machine
  3. Start embroidery
    Thread must be Rayon which has durability for heat
  4. Set thermal transfer sheet
    Take stabilizer away, press thermal transfer sheet with pressing machine (or clothes iron)
    (Temparature : 140 C (284 F), Pressure : Middle)
  5. Cut out with soldering iron
    Rayon thread has durability for heat, other thread doesn't, so may be damaged.
  6. Attach emblem on any part with pressing machine

Accessory

  • Embroidery frame (medium) 100mm x 100mm (4 x 4 inches)
  • Stabilizer
  • Thermal transfer sheet
  • Appliqué material
  • Pressing machine (clothes iron possible)
  • Soldering iron

Baby Shoe

; ;
 

Baby Shoe

Cap on Side

; ;
 

Cap on Side

Collar for Pets

; ;
 

Collar for Pets

Dress Shirt on Collar

; ;
 

Dress Shirt on Collar

Golf Batting Glove

; ;
 

Golf Batting Glove

Tongue of a Shoe

; ;
 

Tongue of a Shoe

Shoes on the Side

; ;
 

Shoes on the Side

Shoulder Bag

; ;
 

Shoulder Bag

Cleaning the Hook

; ;
 

Cleaning the Hook

Cleaning the Needle Plate

; ;
 

Cleaning the Needle Plate

Cleaning the Bobbin Case

; ;
 

Cleaning the Bobbin Case

Cleaning the Upper Thread

; ;
 

Cleaning the Upper Thread

Oiling the Needle Bar

; ;
 

Oiling the Needle Bar

Oiling the Hook

; ;
 

Oiling the Hook